Favourable shipping conditions
More than 5000 satisfied installers
Expert knowledge and webinars
Hotline +49 89 9041015-00

Mounting systems

No results were found for the filter!
Lehmann Creaton MZ3, anthracite
Lehmann Creaton MZ3, anthracite Manufacturer: Lehmann Type designation: 7150711052037 Order number: 7398

K2 single rail 36 connector set
K2 single rail 36 connector set Manufacturer: K2 Systems Type designation: 2001976 Order number: 6083

K2 roof hook vario 1
K2 roof hook vario 1 Manufacturer: K2 Systems Type designation: 1000125 Order number: 6097

K2 roof hook Vario 2
K2 roof hook Vario 2 Manufacturer: K2 Systems Type designation: 1000107 Order number: 6099

We listen to your wishes
New: Schletter now @ Memodo
Discover now

Explore our extensive range, featuring the new and robust 3.55m SoloPro rail - available exclusively in our shop.

Hanger bolt M12x250 mm
Hanger bolt M12x250 mm Manufacturer: Alumero Type designation: 18010 Order number: 6200

Substructure package for 10 modules from K2, SingleRail, slanted roofs, 2-layer

K2 SingleHook 2
K2 SingleHook 2 Manufacturer: K2 Systems Type designation: 2003175 Order number: 6321

K2 BlackCover SingleRail 36
K2 BlackCover SingleRail 36 Manufacturer: K2 Systems Type designation: 2003523 Order number: 9706

K2 insert nut with mounting clip, stainless steel
K2 insert nut with mounting clip, stainless steel Manufacturer: K2 Systems Type designation: 1001643 Order number: 6459

Mounting PV vertically
K2 facade systems
now in the shop
View the products

ou can find K2 Systems Facade PV products in our shop or on request from your Memodo sales representative.

Alumero support profile 45 (3.3 m) black
Alumero support profile 45 (3.3 m) black Manufacturer: Alumero Order number: 5830

Example image
Marzari metal roof panel type Extra AT 260, black-grey
Marzari metal roof panel type Extra AT 260, black-grey Manufacturer: Marzari Type designation: EXAT260 Order number: 6464

K2 AddOn 30
K2 AddOn 30 Manufacturer: K2 Systems Type designation: 2001707 Order number: 6470

There is no solar module without a substructure! The right mounting system is the key component for a perfect support of a photovoltaic system. It is the link between the roof of the house and the modules. In the best case, your substructure will be barely visible but still reliable. To achieve this, you need to plan the construction in advance and calculate the wind and suction loads. Project-specific structural calculations can help you in this process.

Use the design programs to plan the substructure individually.

 
Viewed