Favourable shipping conditions
More than 5000 satisfied installers
Expert knowledge and webinars
Hotline +49 89 9041015-00

Mounting systems

No results were found for the filter!
T-head bolt V2A M10x30
T-head bolt V2A M10x30 Manufacturer: Praetner Order number: 534

Alumero cross connector 2.1
Alumero cross connector 2.1 Manufacturer: Alumero Order number: 474

T-head bolt V2A M8x20 with serrated locknut
T-head bolt V2A M8x20 with serrated locknut Manufacturer: Praetner Order number: 3630

Alumero hanger bolt M10, 200mm
Alumero hanger bolt M10, 200mm Manufacturer: Alumero Order number: 518

We listen to your wishes
New: Schletter now @ Memodo
Discover now

Explore our extensive range, featuring the new and robust 3.55m SoloPro rail - available exclusively in our shop.

Alumero Allen screw M8x35
Alumero Allen screw M8x35 Manufacturer: Alumero Order number: 522
Alumero hanger bolt M12, 300mm
Alumero hanger bolt M12, 300mm Manufacturer: Alumero Order number: 519

Alumero Allen screw M8x45
Alumero Allen screw M8x45 Manufacturer: Praetner Order number: 1391

K2 TerraGrif K2SZ Landscape / Portrait
K2 TerraGrif K2SZ Landscape / Portrait Manufacturer: K2 Systems Type designation: 2001881 Order number: 6075

K2 mounting rail single rail 36 with 3.30m
K2 mounting rail single rail 36 with 3.30m Manufacturer: K2 Systems Type designation: 2003221 Order number: 6082

Mounting PV vertically
K2 facade systems
now in the shop
View the products

You can order the K2 Systems products for PV facade installations from our online shop or by contacting uk@memodo.de.

K2 hanger bolts climber set M10x200
K2 hanger bolts climber set M10x200 Manufacturer: K2 Systems Type designation: 2003273 Order number: 6125

Remaining quantity
K2 Module middle clamp XS 30 mm set, silver
K2 Module middle clamp XS 30 mm set, silver Manufacturer: K2 Systems Type designation: 1005156 Order number: 6424
K2 SingleRail SpliceFoot
K2 SingleRail SpliceFoot Manufacturer: K2 Systems Type designation: 2003393 Order number: 9876

1 2 3 4 5

There is no solar module without a substructure! The right mounting system is the key component for a perfect support of a photovoltaic system. It is the link between the roof of the house and the modules. In the best case, your substructure will be barely visible but still reliable. To achieve this, you need to plan the construction in advance and calculate the wind and suction loads. Project-specific structural calculations can help you in this process.

Use the design programs to plan the substructure individually.

 
Viewed