Enwitec switching device Fronius Symo Hybrid / Gen24, including Smart Meter D/A/CH
Type of manufacturer: | 3PH_FRO_BBDAP_20KW_3PH_1.0 |
---|---|
Manufacturer Art. No.: | 10015613 |
Art. Nr.: | 5811 |
Pieces per package unit: |
|
Accessory type: | Emergency power |
WEEE-Number: |
|
Prices are only visible to business customers upon successful registration.
Available from stock
Product number:
5811
Description
Emergency power by your Fronius Symo Hybrid / Gen24 System
This switching device enables your Fronius Symo Hybrid / Symo Gen24 system to provide a 3-phase backup power supply for specific loads in the event of a power failure. Due to the DC coupling, the modules remain active and can contribute to the supply or storage charging.
Country approval: Germany, Switzerland and Austria (must be coordinated with the responsible utility company). Note: not suitable for Fronius Primo Gen24
Product benefits:
- Completely ready for connection and approved by Fronius
- All-pole mains disconnection
- Fronius Smart Meter TS65A-3 is integrated
- Very quiet, hum-free contactor
- Pre-assembled including all cable glands and installation guide
- Design according to the "Fronius Symo Hybrid / Gen24 - Overview" circuit diagram
- Protection type IP65 with transparent door
- Max. continuous power up to 20 kW
- Approved for mains type: TN-S, TT, TN(C)-S
- Standard variant for Germany and Switzerland
- You will find here an alternative with additional connection for PV inverters up to 8.2 kVA and up to 20 kVA.
- Manufacturer’s article number: 10015613
Downloads
Downloads
-
Matching accessories