Enwitec switching device Fronius Symo Hybrid / Gen24, including Smart Meter, AT
Type of manufacturer: | 3PH_FRO_BBD3P_20KW_3PH_1.0 |
---|---|
Manufacturer Art. No.: | 10016183 |
Art. Nr.: | 5813 |
Pieces per package unit: |
|
Accessory type: | Emergency power |
WEEE-Number: |
|
Prices are only visible to business customers upon successful registration.
- Remaining quantity
Available from stock
Product number:
5813
Description
Emergency power with your Enwitec switching device Fronius Symo Hybrid / Gen24, including Smart Meter, AT
This switching device enables your Fronius Symo Hybrid / Symo Gen24 system to provide a 3-phase backup power supply for specific loads in the event of a power failure. Due to the DC coupling, the modules remain active and can contribute to the supply or storage charging.
3-pole mains disconnection - the variant with all-pole disconnection can be found here.
If you need a switching device with FRT (this is required by a few grid operators in Austria according to TOR generator type A), you will find this here.
Product benefits:
- Completely ready for connection and approved by Fronius
- 3-pole mains disconnection
- Fronius Smart Meter TS65A-3 is integrated
- Very quiet, hum-free contactor
- Pre-assembled including all cable glands and installation guide
- Design according to the "Fronius Symo Hybrid / Gen24 - Overview" circuit diagram
- Protection type IP65 with transparent door
- Max. continuous power up to 20 kW
- Approved for mains type: only TN-S
- Standard variant for Austria
- Manufacturer’s article number: 10015628
Note: not suitable for Fronius Primo Gen24
Downloads
Downloads
-
Matching accessories